Peterson Real Fyre Ignition Types

Peterson Real Fyre Vented Ignition Options

Match Light:

The Match Light lighting method is the most basic method, with no pilot valve assembly at all. Just place your match or lighter in the fireplace near the log burner, turn on the gas with your key valve already installed near your fireplace. Control the flame height by adjusting your key valve. Match Light is not an available option for Fireplaces using propane.
Match Light Peterson Real Fyre
Manual Safety Pilot Light Kit Peterson Real Fyre

Manual Safety Pilot:

The manual safety pilot lighting method features a pilot valve assembly you install on your burner. It features a pilot light that you can keep lit allowing you to turn the log set on and off without ever holding a match to the burner. The safety pilot kit has a safety mechanism built in so if the pilot light ever goes out it will shut off the gas supply.

Basic On/Off Remote:

The On/Off remote lighting method features a pilot valve assembly installed with your burner. It has a pilot light that you can keep lit allowing you to turn the log set on and off with the included remote control. You cannot however adjust the flame height with the remote. The safety pilot kit has a safety mechanism built in so if the pilot light ever goes out it will shut off the gas supply.
On/Off Remote Safety Pilot Light Kit Peterson Real Fyre
Variable Flame Remote Safety Pilot Light Kit Peterson Real Fyre

Variable Flame Remote:

The Variable Flame Remote lighting method features an included pilot valve assembly you install on your burner. It has a pilot light that you can keep lit giving you the ability to turn the log set on and off as well as adjusts the flame height, all with the included remote control. The safety pilot kit has a safety mechanism built in so if the pilot light ever goes out it will shut off the gas supply.

Electronic On/Off Remote:

The electronic on/off remote lighting method features a non-standing pilot assembly installed with your burner. With this feature, the pilot light on your gas log set does not stay lit. Each time you turn the log set on with your remote, an electronic signal is sent to
the valve assembly, lighting the pilot, which then ignites the log set. The pilot light then goes out.
Electronic On/Off Remote Safety Pilot Light Kit Peterson Real Fyre

Peterson Vent Free Ignition Options

Manual Safety Pilot:

The Manual Safety Pilot lighting method features a pilot valve assembly pre-installed on your burner. You then have a pilot light that you can keep lit giving you the ability to turn the log set on and off as many times as you want without ever holding a match to the burner. The safety pilot kit has a safety mechanism built in which senses if the pilot light ever goes out and shuts off the gas supply. It also will shut off the gas supply if it senses a lack of oxygen.

Basic On/Off Remote:

The On/Off Remote lighting method features a pilot valve assembly pre-installed on your burner. You then have a pilot light that you can keep lit giving you the ability to turn the log set on and off with the included remote control. You can not however adjust the flame height with the remote. The safety pilot kit has a safety mechanism built in which senses if the pilot light ever goes out and shuts off the gas supply. It also will shut off the gas supply if it senses a lack of oxygen.

Variable Flame Remote:

The Variable Flame Remote lighting method features a pilot valve assembly pre-installed on your burner. You then have a pilot light that you can keep lit giving you the ability to turn the log set on and off as well as adjust the flame height, all with the included remote control. The safety pilot kit has a safety mechanism built in which senses if the pilot light ever goes out and shuts off the gas supply. It also will shut off the gas supply if it senses a lack of oxygen.

Electronic Variable Remote:

The electronic variable remote lighting method features a non-standing pilot pre-installed with your burner. With this method, the pilot light on your gas log set does not stay lit. Each time you turn the log set on with your remote, an electronic signal is sent to the valve assembly, lighting the pilot, which then ignites the log set. The pilot light then goes out. The Remote can be used to adjust flame height and includes thermostat display.

Please feel free to contact us if you have any further Gas Log Questions at Peterson Fire Logs.

Advertisements

About The Shopping Bug

Shopping Bug consists of a network of specialty retail websites. Products range from Patio Furniture, BBQ Grills,Sporting Equipment,Kitchen Appliances, Office Supplies, and much more. Connect with the author of these posts, The Shopping Bug at
This entry was posted in Peterson Real Fyre. Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s